John Lewis JLBILIC02 The Control Panel, Push button, When the Fridge is first installed, Display

Models: JLBILIC02

1 10
Download 10 pages 39.16 Kb
Page 9
Image 9
The Control Panel

The Control Panel

On /Off

Mode

 

 

1

 

 

 

5

2

 

4

3

 

A

B

C

D

Push button

 

 

 

A -

Appliance button ON/OFF

C -

Function button

B -

Temperature and function indicator

D -

Thermostat control knob

DISPLAY

Drill the unit using a Ø 2.5 mm drill (10 mm max. penetration);

Fix the square fitting to the appliance.

Ø 2,5

13mm

D740

 

 

 

2

 

 

4

 

1

3

 

1.

Door open alarm indicator

 

 

3.

Temperature indicator

2.

Positive or negative Temperature indicator

 

 

4.

Illuminated when the shopping function is on

Fit the appliance in the niche by making sure that it stands against the interior surface of the unit on the side where the door hinges of the appliances are fitted. Insert the appliance until the upper strip butts up against the unit (1) and make sure that the lower hinge is in line with the surface of the unit (2).

2

D022

When the Fridge is first installed

Push button Warning

Allow the appliance to stand for 2 hours after installation.

Insert the plug into the wall socket.

After plugging the plug into the power outlet, if the display is not illuminated, press key (A), appliance on.

As soon as the appliance is turned on, the following signals will appear on the control panel:

symbol (2) will be positive, indicating that the temperature is positive.

Place the refrigerator adjustment knob (D) in a middle position, and the appliance will be set up to provide the following temperature:

roughly +5°C in the refrigerator.

Activation of functions

Each time button C is pressed, the following functions are activated in a clockwise direction:

Symbol 4 : shopping function.

No Symbol: Normal operation

Switching off

The appliance is shut off by holding in button (A) for more than 1 second.After this, a countdown of the temperature from -3 -2 -1 will be shown.

When the appliance is shut off, display (B) also goes off.

Fasten the appliance with 4 screws provided in the kit included with the appliance.

(I = short) (P = long)

I

P

Apply the sealing strip pushing it between the refrigerator and the adjacent cabinet.

D724

12

9

Page 9
Image 9
John Lewis JLBILIC02 The Control Panel, Push button, When the Fridge is first installed, Display, Activation of functions