2.Press the delay start button until the display shows the number of the selected washing programme.
•The programme number flashes for a few seconds and then the time of the washing programme comes on.
3.Close the appliance door. The washing programme starts automatically.
Warning! Interrupt or cancel a washing programme in progress only if it’s absolutely necessary. Hot steam may escape when the appliance door is opened. Open the door carefully.
Interrupting a washing programme in progress
1.Open the appliance door. The washing programme stops.
2.Close the appliance door. The programme continues from the point at which it was interrupted.
•Press and hold the Reset button until the display shows two horizontal status bars. The washing programme has been cancelled.
Make sure that there is detergent in the detergent dispenser before you start a new washing programme.
End of the washing programme
When the washing programme is completed, an intermittent acoustic signal sounds.
1.Open the appliance door.
•The display shows a zero.
•The End indicator is on.
2.Switch off the appliance.
Leave the door ajar and wait a few minutes before removing the dishes. In this way they will be cooler and the drying will be improved.
Cancelling the washing programme
If the washing programme has not yet started, you can change the selection. When a washing programme is in progress, you cannot change the selection. You have to cancel the programme to make a new selection.
It is recommended that the appliance is unplugged and the water tap turned off when the washing programme is completed.
Unloading the appliance
•Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.
•Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
21
