•To activate or deactivate the rinse aid dispenser (only with the Multi tab function activated).
•To activate or deactivate the acoustic signals.
Switch on the appliance. The appliance is in setting mode when:
•The display shows two horizontal status bars.
Switch on the appliance. The appliance is not in setting mode when:
•The display shows the time of the washing programme or of the delay start.
–Cancel the programme or the delay start to go back to the setting mode. Refer to 'Select and start a washing programme'.
Acoustic signals
The acoustic signals indicate:
•The electronic setting of the water softener.
•The end of the washing programme.
•The intervention of an alarm code related to a malfunction.
Factory setting: acoustic signals activated. It is possible to deactivate the audible signals, using the function buttons on the control panel.
Deactivating the acoustic signals
1.Switch on the appliance. Make sure that the appliance is in setting mode.
2.Press and hold function button (B) and function button (C) simultaneously until the indicators of function buttons (A), (B) and (C) start to flash.
3.Release function button (B) and function button (C).
4.Press function button (C), the indicators of function buttons (A) and (B) go off while the indicator of function button (C) continues to flash. The display shows the current setting of the acoustic signals.
Acoustic signals deactivated
Acoustic signals activated
5.Press function button (C) again to change the setting. The display shows the new setting.
6.Switch off the appliance to confirm the operation.
To activate the acoustic signals again, do steps (1) through (6).
Washing programmes
Programme | Degree of soil and | Programme | Energy save |
| type of load | description | function |
|
|
|
|
1 | Any soil. | Prewash | YES (impact on |
Crockery, cutlery, pots | Wash 45 °C or 70 °C | washing | |
| and pans. | Rinses | programme) |
|
| Dry |
|
|
|
|
|
9
