Installation
Warning! It is dangerous to alter the specifications or attempt to modify this product in any way.
This appliance is heavy. Care should be taken when moving it.
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
Any electrical work required to install this appliance must be carried out by a qualified electrician or competent person.
Any plumbing work required to install this appliance must be carried out by a qualified plumber or competent person.
Unpacking
•Remove all packaging before positioning the machine.
•If possible, position the machine next to a water tap and a drain.
Fitting under a counter
(Kitchen worktop or sink)
By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre- existing top, providing the dimensions of the recess correspond to those shown in the picture.
Proceed as follows:
Remove the machine’s worktop by unscrewing the two rear retaining screws (1), pull the worktop from the back of the machine
(2)and slide out the front slots, lifting the worktop (3).
28