Once this function is selected it will remain active for all following wash programmes. With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated.
When using the Multi tab function, the cycle durations may change. If this is the case, the running time for the programme is automatically updated on the digital display.
Activate/deactivate the Multi tab function before the start of a washing programme.
Once the programme is running, the Multi tab function can NO longer be changed. If you want to cancel the Multi tab function you have to cancel the programme setting and then deactivate the Multi tab function.
In this case you have to set a washing programme (and desired options) again.
Activation/deactivation of the Multi tab function
Press the Multi tab button, the corresponding indicator light illuminates. This means that the function is active.
To deactivate the function press the
If the drying results are not satisfactory we suggest that you:
1.Fill up the rinse aid dispenser with rinse aid.
2.Activate the rinse aid dispenser.
3.Set the rinse aid dosage to position 2.
•The activation/deactivation of the rinse aid dispenser is only possible with the Multi tab function active.
If you decide to revert back to the use of individual detergents we advise that you:
1.Deactivate the Multi tab function.
2.Fill up the dispensers for salt and rinse aid again.
3.Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes.
4.Adjust the water hardness setting according to the hardness of the water in your area.
5.Adjust the rinse aid dosage.
Select and start a washing programme
1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate.
2.Check that the water tap is opened.
19
