4.Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B).
5.Clean all filters thoroughly under running water.
6.Remove the flat filter from the base of the washing compartment and clean both faces thoroughly.
flat filter does not protrude above the base of the washing compartment.
NEVER use the dishwasher without filters.
Incorrect repositioning and fitting of the filters will produce poor washing results and will result in damage to the appliance.
NEVER try to remove the spray arms.
If residues of soil have clogged the holes in the spray arms, remove the debris with a cocktail stick.
External cleaning
Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc...).
7.Put the flat filter back in the base of the washing compartment and ensure that it fits perfectly.
8.Place the coarse filter (A) in the microfilter (B) and press together.
9.Put the filter combination in place and lock by turning the handle clockwise to the stop. During this process ensure that the
Internal cleaning
Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.
We recommend every 3 months you run the wash programme for heavy soiled dishes using detergent but without dishes.
Prolonged periods of non- operation
If you are not using the machine for a prolonged period of time you are advised to:
1.Unplug the appliance and then turn off the water.
2.Leave the door ajar to prevent the formation of any unpleasant smells.
3.Leave the inside of the machine clean.
23
