John Lewis JLDWW 1206 Cancelling a delay start or a washing programme in progress

Models: JLDWW 1206

1 36
Download 36 pages 56.2 Kb
Page 20
Image 20
Cancelling a delay start or a washing programme in progress

Set the washing programme, delay start and half load with the dishwasher door slightly open.

The selection can also occur with the door closed. Keep in mind that this way you have ONLY 3 seconds between one selection and another, after which the washing programme will start automatically.

3.Switch on the dishwasher. The appliance must be in setting mode: message CHOOSE PROGRAMME displayed.

4.Select the washing programme by pressing one of the programme scrolling buttons.

If a button is pressed only once, the last performed washing programme will be proposed.

5.If required, postpone the start time of the washing programme by using the delay start option. The start of the washing programme can be delayed for between 1 and 19 hours.

6.Close the dishwasher door, the programme starts automatically. Once the programme is running the display shows:

the phases of the progress of the programme,

updates the running time of the programme.

7.If the start of the programme has been postponed, the countdown will start automatically once the dishwasher door is closed.

The countdown will decrease in steps of 1 hour.

Opening the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted.

Once the delay start has elapsed the programme will start automatically.

If during the progress of the delay start or the running of the washing programme you wish to see which programme has been set or is performing; press one of the programme scrolling buttons. The name of the programme will appear for a few seconds in the display.

Warning! Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary. Attention! Hot steam may escape when the door is opened. Open the door carefully.

Cancelling a delay start or a washing programme in progress

To cancel a washing programme or a delay start in progress you have to reset the appliance.

Cancelling a delay start will also cancel a washing programme. You have to set the washing programme again.

Simultaneously press and hold the two buttons positioned over the word Cancel until the message CHOOSE PROGRAMME appears on the display. The washing programme or the delay start has been cancelled.

If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.

20

Page 20
Image 20
John Lewis JLDWW 1206 instruction manual Cancelling a delay start or a washing programme in progress