Unpacking

The appliance must always be transported in the vertical position as indicated on the outside of the

packaging.

After each transportation the appliance must not be switched on for approx. 2 hours.

To ensure the coolant gases settle.

Unpack the Fridge Freezer and check for any possible damage. If the appliance is damaged please report this to the John Lewis branch from which you purchased; in this case please retain the packaging. Report possible damages immediately to the place you bought it. In that case retain packaging.

Cleaning

Remove all adhesive tape and ties, which ensure the internal fittings do not move during transportation.

Wash the inside of the appliance using lukewarm water and mild detergent; using a soft cloth.

Further cleaning advice is given on page 18. wipe out the inside of the appliance.

Positioning

The appliance should be located in a well ventilated, dry room.To ensure correct operation the appliance should:

Not be exposed to direct sunlight.

Not be installed next to radiators, cookers or other sources of heat.

Only be installed in a location where the ambient temperature corresponds to the climate classification for which the appliance is designed.

Climate Classification

The climate classification can be found on the rating plate; which is located on the bottom left hand side of the fridge compartment, see page 5' .

The table shows the correct operating ambient temperature for each climate class.

Class of climate

Ambient temperature

SN

+10…+32°C

N

+16…+32°C

ST

+18…+38°C

If the temperature rises above or falls below the stated ambient temperature for the climate class, the operation of the appliance may be affected.

Ventilation

You should ensure that air could circulate freely around the back and top of the cabinet. In the Instruction manual bag there are two spacers which must be fitted to the top rear corners. This will ensure a gap is maintained between the Fridge Freezer and the wall.

Loosen the screws and insert the spacer under the screw head, then re-tighten the screws.

Levelling

When placing the appliance ensure that it stands level, to prevent

vibration, excessive noise and to ensure the doors shut correctly.

Level the appliance by turning the 2 adjustable feet at the front of the Fridge Freezer.

When placing the refrigerator keep minimal distances recommended in figure.

A:placing it under a wall-cupboard

B:placing it freely

7

Page 7
Image 7
John Lewis JLFFW1803 instruction manual Cleaning, Positioning, Climate Classification

JLFFW1803 specifications

The John Lewis JLFFW1803 is a standout appliance in the realm of frost-free freezers, seamlessly merging functionality with modern technology. This upright freezer is designed to meet the demands of contemporary households, providing ample storage space and user-friendly features that cater to the needs of busy families.

One of the most notable features of the JLFFW1803 is its substantial capacity. With an impressive total net volume, it offers generous storage for a variety of frozen foods, from bulk purchases to everyday essentials. The adjustable shelves and removable drawer design allow users to customize the interior space, making it easy to organize different items and find what you need quickly.

Efficiency is a key characteristic of this model. The John Lewis JLFFW1803 boasts an energy efficiency rating that helps to reduce electricity bills while minimizing environmental impact. Operating on the principle of frost-free technology, this freezer eliminates the need for manual defrosting, saving time and effort. The advanced fan system ensures even circulation of cold air, preventing ice build-up and maintaining optimal storage conditions.

In terms of temperature management, the JLFFW1803 includes a clear digital display that allows users to monitor and adjust temperature settings effortlessly. This feature ensures that stored items remain at their ideal freezing temperatures, safeguarding freshness and quality. The appliance also includes an audible alarm that alerts users if the door is left open for an extended period, further enhancing food safety.

The design of the JLFFW1803 is both functional and aesthetically pleasing. Its sleek exterior and modern finish make it a great addition to any kitchen or utility space. Additionally, the integrated handle and reversible door add to the convenience of use, allowing for flexible installation based on kitchen layout.

Security features are also integrated into the JLFFW1803, with a child lock option that ensures safety in homes with young children. Overall, the John Lewis JLFFW1803 stands out for its blend of impressive features, user-friendly technology, and energy efficiency, making it a reliable choice for anyone seeking a high-quality freezer that balances practicality with modern design. This appliance is a testament to John Lewis’ commitment to quality and innovation in home appliances.