Change of door opening direction
It is possible to reverse the door opening from
Please follow the procedure as detailed below:
1.To complete the operations listed below it is recommended you ask another person for assistance.
2.Disconnect the appliance from the electricity supply.
3.Open the doors and dismount the double door hinge (a,b) by removing the screws (2 pieces) (c). (fig. 2)
4.Take off the double door hinge (a,b,c) by gradually removing it from the cabinet, slightly tilting both doors. Do not forget to remove the plastic spacer (b) under the hinge. (fig. 2)
5.Take off the refrigerator door by pulling it slightly downwards.
6.Take off the freezer door by pulling it slightly upwards.
7.Unscrew the top door hinge pin (d) of the refrigerator then screw it back on the other side. (fig. 1)
8.Remove the insert of the plinth (e) by a screwdriver. (fig. 3)
9.Unmount the lower hinge pin (f) and its washer (h) and mount them on the other side. (fig. 3)
10.Replace the insert of the plinth (e) on the other side.
11.Remove the blanking pins (3 pieces) (n,k) of the double door holder on the left side and put them to the other side. (fig. 2)
12.Fit the pin of the double door hinge (m) into the left drill of the freezer door. (fig. 2)
13.Fit the freezer door to the lower door hinge pin (f). (fig. 3)
14.Fit the refrigerator door to the upper door hinge pin (d) then slightly tilting both doors fit the pin of the double door hinge (m) into the left drill of the refrigerator door.
15.Opening both doors fix the double door hinge onto the left side using the screws (2 pieces) (c). Do not forget to replace the plastic spacer (b) under the hinge. Be careful that the door edges are parallel with the edge of the top panel.
16.Transfer the handles (r) to the other side and place the plastic blanking pins (p) supplied in the plastic bag of this instruction book into the holes set free. (fig. 4)
17.Stand the appliance in its place, set it level, check that the door seals met the cabinet body all around the doors and then reconnect it.
An authorised service engineer will reverse the doors on a chargeable basis; See
fig. 1.
fig . 2. |
fig. 3.
fig. 4.
8
