John Lewis JLTDC01 instruction manual Programming options, Objective Implementation

Programming options

Objective	Implementation
	1. Turn the programme selector to any programme.
Permanently programme on the audi-	2. Press the ALARM button and hold down for approx. 5 seconds.
ble signal which reminds you that the	A brief signal sounds several times. The ALARM display flashes several times.
programme is complete.	The setting is permanently programmed.
	The setting is cancelled as described under 1 and 2.
	1. Turn the programme selector to any programme.
	2. Press the SILK and ALARM buttons at the same time and hold down for approx. 5
	seconds.
Adjust “level of dryness” detection:	The current setting appears on the multi-display:
If you wish the laundry to be slightly	– C0: Setting for drier laundry
drier or slightly damper at the end of	– C1: Standard setting
the programme than with the stand-	– C2: Setting for damper laundry
ard setting.	3. Press the START/PAUSE button until the setting required appears on the multi-dis-
	play.
	4. Turn the programme selector to OFF.
	The setting is permanently programmed.
	1. Turn the programme selector to any programme.
To deactivate the FULL TANK display	2. Press the WOOL and ANTI-CREASE buttons at the same time and hold down for
when using an external drain for the	approx. 5 seconds. The multi-display briefly displays ”0”
	The FULL TANK display is permanently deactivated.
condensed water.
	The setting is cancelled as described under 1 and 2; the multi-display however briefly
	displays ”1” (rather than ”0”).

19