Johnson Controls AHR, AHE installation manual Models Ahr / Ahe, General Information

Models: AHR AHE

1 4
Download 4 pages 16.98 Kb
Page 1
Image 1
ACCESSORY KIT INSTALLATION MANUAL

ACCESSORY KIT INSTALLATION MANUAL

ELECTRIC HEATER ACCESSORY - 6HK SERIES

FOR USE WITH THE FOLLOWING AIR HANDLER

MODELS: AHR / AHE

GENERAL INFORMATION

ELECTRICAL SHOCK HAZARD

Installation or repairs made by unqualified persons can result in hazards to you and others. Installation must conform with local building codes or, in the absence of local codes, with National Electrical Code ANSI/NFPA 70-1996 or current edi- tion.

The information contained in this manual is intended for use by a qualified service technician familiar with safety proce- dures and equipped with the proper tools and test instru- ments.

Shut OFF electric power at unit disconnect and/or service panel before beginning the following procedures.

Failure to carefully read and follow all instructions in this man- ual can result in malfunction, property damage, personal injury, and/or death.

Verify edges of foil faced insulation are not in contact with any exposed electrical connections.

This instruction covers the physical installation of the following electric heaters with AHR/AHE18-60 single piece air handlers. Refer to unit instructions for electrical specifications.

These electric heat accessories are used for applications of cooling with electric heat and heat pump with electric heat. Each of the air handler unit models are approved for use with specific electric heat accessories. The Air Handler installation instructions, or name plate list the possible combinations and other important electrical data and limitations.

TABLE 1: Models Covered*

6HK06500206

6HK16502506

6HK16500206

6HK06501525

6HK06500506

6HK06501825

6HK16500506

6HK16501825

6HK06500806

6HK16502025

6HK16500806

6HK16502525

6HK06501006

6HK26501306

6HK16501006

6HK26501506

6HK16501306

6HK26501806

6HK16501506

6HK26502006

6HK16501806

6HK26502506

6HK16502006

 

 

 

* Refer to Page 4 for nomenclature.

3. REMOVE

DUCT COVER

4. SLIDE HEATER KIT INTO AIR HANDLER AND ATTACH WITH 4 DUCT COVER SCREWS

5. FIELD SUPPLY WIRING THIS SIDE

1. IF HEAT KIT TO BE INSTALLED ELECTRIC HEATER ACCESSORY - 6HK SERIESFOR USE WITH THE FOLLOWING AIR HANDLER HAS CIRCUIT BREAKERS, MODELS: AHR / AHEGENERAL INFORMATIONELECTRICAL SHOCK HAZARD REMOVE CIRCUIT BREAKERManual backgroundManual background KNOCKOUTS.

2.BLOWER ACCESS PANEL

FIGURE 1: Heater Installation

Johnson Controls Unitary Products

669997-UAI-D-1111

Page 1
Image 1
Johnson Controls AHR, AHE installation manual Models Ahr / Ahe, General Information, Accessory Kit Installation Manual