Johnson Controls AS-CVTPROx00-1 manual PC via RS232

Table 1: Cables Included with the CVTPRO Converter

To Connect the CVTPRO	Use This Cable:
Converter To:
PC via RS232	CVTPRO serial cable (18 inches/457 mm)
Controller via the Zone Bus	8-pin RJ45 to 6-pin RJ11 phone cable (6 ft/1.8 m)
Controller via the N2 Bus	4-pin N2 socket/3-pin N2 plug to 6-pin RJ11 phone cable (6 ft/1.8 m)
	Note: Remove the 4-pin N2 socket from the cable and use the bare wires to
	connect to N2 screw terminal devices.

Controller Zone Bus (via TE-6x00/ TMZ sensor)

6-pin to 6-pin RJ11 phone cable (6 ft/1.8 m)

Table 2: Connections to Palm Devices

To Connect the CVTPRO	Use:	In This Sequence
Converter To:
Palm III and Palm VII Devices	Nothing	Palm III/Palm VII ⇒ CVTPRO converter
Palm V Device	Dock V Pro™ Adapter1	Palm V ⇒ Dock V Pro Adapter ⇒ CVTPRO converter
Palm m100 and m105 Devices	Palm HotSync® Cable2	Palm m100/m105 ⇒ Palm HotSync Cable ⇒ null
	2	modem adapter ⇒ CVTPRO Serial Cable ⇒
	Null Modem Adapter
		CVTPRO converter
	3
	CVTPRO Serial Cable
Palm m125, m130, and m5xx	Belkin® Serial Sync Cable2	Palm m125/m130/m5xx ⇒	Belkin Serial Sync Cable
Devices	2	⇒ null modem adapter ⇒	CVTPRO Serial Cable ⇒
	Null Modem Adapter	CVTPRO converter
	CVTPRO Serial Cable3

1The Dock V Pro adapter is available from Solvepoint Corporation at www.palmdock.com and local retailers.

2Order through Johnson Controls e-Purchasing (ITAS). See Table 3.

3Included with the CVTPRO converter.

Table 3: CVTPRO Converter and Accessories Product Code Numbers

Product Code	Description
Number
AS-CVTPRO100-1	Zone Bus/N2 Bus Interface Converter with 120VAC/3VDC power adapter (North American
	version)
AS-CVTPRO200-1	Zone Bus/N2 Bus Interface Converter without power adapter (European version)
AS-CVTPRO-701	CVTPRO converter without cables or case
AS-CVTCBL-700	Replacement set of cables used with the CVTPRO converter
Dock V Pro adapter**	Adapter to connect the CVTPRO converter to a Palm V device
F3X1082-03*	Belkin Serial Sync Cable for use with CVTPRO converter and Palm m125/m130/m5xx Devices
ME213*	Black Box™ Null Modem Adapter for use with CVTPRO and Palm
	m100/m105/m125/m130/m5xx Devices
P10701U*	Palm HotSync Cable for use with CVTPRO converter and Palm m100/m105 Devices

*These are the manufacturer’s code numbers, not Johnson Controls code numbers. Order through Johnson Controls e-Purchasing (ITAS).

**The Dock V Pro adapter is available from Solvepoint Corporation at www.palmdock.com and local retailers.

2AS-CVTPROx00-1 Zone Bus/N2 Bus Interface Converter Installation Instructions