Johnson Controls AS-CVTPROx00-1 manual Connecting to the CVTPRO Converter

Connecting to the CVTPRO Converter

Figure 5 illustrates the potential connections between a CVTPRO converter and other devices. Refer to Table 1 and Table 2 for more information on cables and Palm devices. See Figure 6 and Figure 7 for more detail about N2 Bus connections.

	C
	A
	LCU
b c	F
de	I

Palm III, Palm V device with Dock V PRO Adapter, or Palm VII1, 2

TE-6x00/TMZ

Room Sensor

RJ11 Jack, 6-Pin

CVTPRO

Converter

					Compatible
External Power					Controller
Adapter3		Serial Port	or
			or	Zone Bus
					RJ45 Jack,
					8 Pin
	CVTPRO	RJ11 6-pin Jack
	Serial Cable
DB9 Port		for Zone Bus/N2 Bus		N2 Bus
		Connection			N2 Bus Interface,
1					4-Pin N2 Socket/
Personal Computer

or 3-Pin N2 Plug with Tab

	C
	A
	LCU
bc	F
de	I

DB9

Connector

Palm m1xx or m5xx

(with additional connectors) See Table 2.

Notes:

1.Do not connect the CVTPRO converter to the Palm device and laptop/PC at the same time.

2.Unplug the Palm device from the CVTPRO converter when not in use (conserves battery power).

3.The CVTPRO200-1 (European version) does not ship with an external power adapter.

Figure 5: Overview of Possible CVTPRO Converter Connections

3AS-CVTPROx00-1 Zone Bus/N2 Bus Interface Converter Installation Instructions