Manuals / Jonsered / Lawn and Garden / Chainsaw

Jonsered CS 2135T manual What Is What?, What is what on the chain saw?

Models: CS 2135T

1 36

Download 36 pages 26.75 Kb

Page 5

Image 5

WHAT IS WHAT?

What is what on the chain saw?

1	Filter cover	16	Bar
2	Front handle	17	Bumper spike
3	Front hand guard	18	Chain catcher
4	Starter	19	Clutch cover with built-in chain brake.
5	Chain oil tank	20	Oil pump adjustment screw
6	Starter handle	21	Throttle control
7	Adjuster screws carburetor	22	Throttle lockout
8	Stop and choke control: Ignition on/off switch Choke	23	Combination spanner
	control/Start throttle lock Working position	24	Chain tensioning screw
		24	Chain tensioning screw
9	Rear handle	25	Operator’s manual (EPA)
		25	Operator’s manual (EPA)
10	Spark plug cap	26	Bar guard
		26	Bar guard
11	Fuel tank	27	Fixing eye for safety line
		27	Fixing eye for safety line
12	Mufﬂer	28	Information and warning decal
		28	Information and warning decal
13	Bar tip sprocket	29	Product and serial number plate
		29	Product and serial number plate

14Air purge

15Chain

English – 5

Page 5

Image 5

Jonsered CS 2135T manual What Is What?, What is what on the chain saw?

Contents

CS 2135T Operator’s manual EPASymbols in the operator’s manual KEY TO SYMBOLSSymbols on the machine Contents CONTENTSDear customer INTRODUCTIONWhat is what on the chain saw? WHAT IS WHAT?Always use common sense GENERAL SAFETY PRECAUTIONSBefore using a new chain saw Personal protective equipment Machine′s safety equipmentChain brake and front hand guard B B AGENERAL SAFETY PRECAUTIONS Will my hand always activate the chain brake during a kickback?Throttle lockout Stop switchChain catcher Vibration damping systemMufﬂer Cutting equipmentGeneral rules Cutting equipment designed to reduce kickbackGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingGENERAL SAFETY PRECAUTIONS ChainAdjustment of depth gauge setting General advice on adjusting depth gauge settingTensioning the chain Sharpening cutting teethChain oil Lubricating cutting equipmentFilling with chain oil Checking chain lubricationChecking wear on cutting equipment Chain drive sprocketGENERAL SAFETY PRECAUTIONS The clutch drum is ﬁtted with one of the following drive sprocketsFitting the bar and chain ASSEMBLYFuel FUEL HANDLINGGasoline Two-stroke oilFueling Fuel safetyTransport and storage Long-term storageStarting and stopping STARTING AND STOPPINGCold engine Warm engineSTARTING AND STOPPING StoppingWORKING TECHNIQUES Basic safety rulesBefore use General working instructionsDo not let go of the handles WORKING TECHNIQUESGeneral rules General Basic cutting techniqueTerms CuttingLimbing Felling technique for tree topsSafe distance Felling directionWORKING TECHNIQUES FellingDirectional cuts Felling cutWhat is kickback? How to avoid kickbackGeneral advice Freeing a tree that has fallen badlyCarburetor adjustment MAINTENANCEBasic settings and running in Fine adjustmentChecking brake band wear Correctly adjusted carburetorChecking the front hand guard Checking the brake triggerStarter MufﬂerChanging a broken or worn starter cord MAINTENANCETensioning the recoil spring Air ﬁlterChanging a broken recoil spring Fitting the starterSpark plug Adjustment of the oil pumpLubricating the bar tip sprocket Cooling systemMAINTENANCE Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data TECHNICAL DATABar and chain combinations Recommended original and replacement bar and chain combinationsSaw chain ﬁling and ﬁle gauges TECHNICAL DATAYOUR WARRANTY RIGHTS AND OBLIGATIONS FEDERAL EMISSION CONTROL WARRANTY STATEMENTMANUFACTURER′S WARRANTY COVERAGE OWNER′S WARRANTY RESPONSIBILITIESSafety precautions for chain saw users AMERICAN STANDARD SAFETY PRECAUTIONSKickback safety precautions Other safety precautions1150324-95 ´z+R@Q¶5x¨ ´z+R@Q¶5x¨