MAINTENANCE

An air filter that has been in use for a long time cannot be cleaned completely. The filter must therefore be replaced with a new one at regular intervals. A damaged air filter must always be replaced.

A JONSERED chain saw can be equipped with different types of air filter according to working conditions, weather, season, etc. Contact your dealer for advice.

Spark plug

The spark plug condition is influenced by:

•Incorrect carburetor adjustment.

•An incorrect fuel mixture (too much or incorrect type of oil).

•A dirty air filter.

These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties.

If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark plug first before taking any further action. If the spark plug is dirty, clean it and check that the electrode gap is 0.020 inch (0.5 mm). The spark plug should be replaced after about a month in operation or earlier if necessary.

Note! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder. Check that the spark plug is fitted with a suppressor.

Lubricating the bar tip sprocket

Lubricate the bar tip sprocket each time you refuel. Use the special grease gun and a good quality bearing grease.

Adjustment of the oil pump

The oil pump is adjustable. Adjustments are made by turning the screw using a screwdriver or combination spanner. The machine is supplied from the factory with the screw set to position 2. Turning the screw clockwise will reduce the oil flow and turning the screw anti-clockwise will increase the oil flow.

+-

Recommended settings:

Bar 13"-15": Position 1

Bar 15"-18": Position 2

Bar 18"-20": Position 3

WARNING! The engine must be stopped

!when making adjustments.

Cooling system

To keep the working temperature as low as possible the machine is equipped with a cooling system.

The cooling system consists of:

1Air intake on the starter.

2Air guide plate.

3Fins on the flywheel.

4Cooling fins on the cylinder.

5Cylinder cover (directs cold air over the cylinder).

Clean the cooling system with a brush once a week, more often in demanding conditions. A dirty or blocked cooling system results in the machine overheating which causes damage to the piston and cylinder.

Note! The cooling system on a chain saw with catalytic converter must be cleaned daily. This is particularly important on chain saws with catalytic converters, because the higher exhaust temperature requires efficient cooling of the engine and the catalytic converter unit.

30 – English

Page 29 Page 31
Page 30
Image 30
Jonsered CS 2135T manual Spark plug, Lubricating the bar tip sprocket, Adjustment of the oil pump, Cooling system
Page 29 Page 31

CS 2135T specifications

The Jonsered CS 2135T is a highly regarded chainsaw designed for professionals and serious enthusiasts alike. Renowned for its robust performance and ergonomic design, the CS 2135T stands out in the competitive field of power tools.

One of the main features of the Jonsered CS 2135T is its powerful engine. It is equipped with a 35cc two-stroke engine that delivers excellent power-to-weight ratio. This makes it particularly useful for tasks that require high performance, such as felling trees or cutting firewood. Additionally, the engine is designed with a reliable starting mechanism, ensuring that users can get to work quickly without frustration.

The CS 2135T also employs advanced technology to enhance its efficiency and ease of use. One notable technology is the Clean Power engine system, which reduces harmful emissions while improving fuel efficiency. This is particularly important for users who are conscious about environmental impact and want to minimize their carbon footprint while working.

Another key feature is the Air Injection centrifugal air cleaning system. This system reduces the amount of debris that enters the air filter, prolonging the lifespan of the filter and maintaining optimal engine performance. As a result, users can expect longer filter intervals, which translates to less maintenance work.

Ergonomics play a significant role in the design of the CS 2135T. The chainsaw is equipped with an anti-vibration system that minimizes vibrations felt by the user, making it more comfortable to operate over extended periods. The handles are designed for a secure grip, providing users with better control and reducing fatigue during use.

Safety is also a priority with the Jonsered CS 2135T. It features a chain brake that acts quickly to stop the chain in the event of kickback, protecting the operator from potential injuries. Additionally, the transparent fuel tank allows users to easily monitor fuel levels, preventing unexpected run-outs during work.

In summary, the Jonsered CS 2135T is a high-performance chainsaw that excels in power, efficiency, ergonomics, and safety. Its combination of advanced technologies, user-friendly features, and robust design makes it an excellent choice for anyone looking to tackle demanding cutting tasks with confidence. Whether you're a professional lumberjack or a homeowner looking for a reliable tool, the CS 2135T is built to deliver exceptional results.
Top Page Image Contents