Fuel Handling

Fuel

Note! The machine is equipped with a two-stroke engine and must always be run using a mixture of gasoline and two- stroke oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Always ensure there is adequate

!ventilation when handling fuel.

Gasoline

•Use good quality unleaded gasoline.

•CAUTION! Engines equipped with catalytic converters must be run on unleaded fuel mixtures. Leaded gasoline will destroy the catalytic converter and it will no longer serve its purpose. The green fuel cap on saws ﬁtted with catalytic converters means that only unleaded gasoline can be used.

•The lowest recommended octane grade is 87 ((RON+MON)/2). If you run the engine on a lower octane grade than 87 so-called knocking can occur. This gives rise to a high engine temperature and increased bearing load, which can result in serious engine damage.

•When working with continuous high revs (e.g. limbing) a higher octane is recommended.

Environment fuel

JONSERED recommends the use of alkylate fuel or environment fuel for four-stroke engines blended with two- stroke oil as set out below. Note that carburetor adjustment may be necessary when changing the type of fuel (see instructions under the heading Carburetor).

Running-in

Avoid running at a too high speed for extended periods during the ﬁrst 10 hours.

Two-stroke oil

•For best results and performance use JONSERED two- stroke engine oil, which is specially formulated for our air- cooled two stroke-engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

Mixing ratio

1:50 (2%) for all engines.

	Gasoline, litre	Two-stroke oil, litre

		2% (1:50)
		2% (1:50)

	5	0,10

	10	0,43/0,20

	15	0,30

	20	0,40

	US gallon	US ﬂ. oz.

	1	2 1/2

	2 1/2	6 1/2

	5	12 7/8

Mixing

•Always mix the gasoline and oil in a clean container intended for fuel.

•Always start by ﬁlling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline.

•Mix (shake) the fuel mixture thoroughly before ﬁlling the machine’s fuel tank.

•Do not mix more than one month’s supply of fuel at a time.

•If the machine is not used for some time the fuel tank should be emptied and cleaned.

Chain oil

•We recommend the use of special oil (chain oil) with good adhesion characteristics.

•Never use waste oil. This results in damage to the oil pump, the bar and the chain.

•It is important to use oil of the right grade (suitable viscosity range) to suit the air temperature.

16 – English

CS 2135T specifications

The Jonsered CS 2135T is a highly regarded chainsaw designed for professionals and serious enthusiasts alike. Renowned for its robust performance and ergonomic design, the CS 2135T stands out in the competitive field of power tools.

One of the main features of the Jonsered CS 2135T is its powerful engine. It is equipped with a 35cc two-stroke engine that delivers excellent power-to-weight ratio. This makes it particularly useful for tasks that require high performance, such as felling trees or cutting firewood. Additionally, the engine is designed with a reliable starting mechanism, ensuring that users can get to work quickly without frustration.

The CS 2135T also employs advanced technology to enhance its efficiency and ease of use. One notable technology is the Clean Power engine system, which reduces harmful emissions while improving fuel efficiency. This is particularly important for users who are conscious about environmental impact and want to minimize their carbon footprint while working.

Another key feature is the Air Injection centrifugal air cleaning system. This system reduces the amount of debris that enters the air filter, prolonging the lifespan of the filter and maintaining optimal engine performance. As a result, users can expect longer filter intervals, which translates to less maintenance work.

Ergonomics play a significant role in the design of the CS 2135T. The chainsaw is equipped with an anti-vibration system that minimizes vibrations felt by the user, making it more comfortable to operate over extended periods. The handles are designed for a secure grip, providing users with better control and reducing fatigue during use.

Safety is also a priority with the Jonsered CS 2135T. It features a chain brake that acts quickly to stop the chain in the event of kickback, protecting the operator from potential injuries. Additionally, the transparent fuel tank allows users to easily monitor fuel levels, preventing unexpected run-outs during work.

In summary, the Jonsered CS 2135T is a high-performance chainsaw that excels in power, efficiency, ergonomics, and safety. Its combination of advanced technologies, user-friendly features, and robust design makes it an excellent choice for anyone looking to tackle demanding cutting tasks with confidence. Whether you're a professional lumberjack or a homeowner looking for a reliable tool, the CS 2135T is built to deliver exceptional results.

Jonsered CS 2135T manual Fuel Handling

Models: CS 2135T

FUEL HANDLING