Cisco Systems 8600 Series Chapter Tag Switching, Chapter BME Multicasting, Chapter BPX Snmp Agent

Organization

Chapter 9	Tag Switching
	Provides a summary of tag switching on the BPX 8650 where the BPX
	switch and associated series 7200 or 7500 router comprise a BPX 8650 Tag
	Switch. Also provides configuration examples.

Chapter 10	BME Multicasting
	Provides a description of BME multicasting and configuration examples.
Chapter 11	Repair and Replacement
	Describes periodic maintenance procedures, troubleshooting procedures,
	and the replacement of major BPX switch components.
Chapter 12	Frame Relay to ATM Network and Service Interworking
	Describes frame relay to ATM interworking which allows users to retain
	their existing Frame Relay services, and as their needs expand, migrate to the
	higher bandwidth capabilities provided by BPX ATM networks. Frame
	Relay to ATM Interworking enables frame relay traffic to be connected
	across high-speed ATM trunks using ATM standard Network and Service
	Interworking.
Chapter 13	Tiered Networks
	Describes the tiered network configuration that provides the capability of
	adding interface shelves/feeders (non-routing nodes) to an IPX/IGX/BPX
	routing network.
Chapter 14	BPX SNMP Agent
	Introduces the functions of the Simple Network Management Protocol
	(SNMP) agent and MIBs that are embedded in each BPX switch.
Appendix A	BPX Node Specifications
	Lists the BPX switch specifications.
Appendix B	BPX Switch Cabling Summary
	Provides details on the cabling required to install the BPX switch.
Appendix C	BPX Switch Peripherals
	Provide details on the specifications for peripherals used with the BPX
	switch.
Appendix D	AT3-6ME Interface Adapter
	Describes the AT3-6M Interface Adapter, sometimes referred to as the
	T3-T2 Interface Adapter, that may be used with the BPX switch to provide a
	6 Mbps ATM network interface to T2 transmission facilities.
Glossary

About This Manual xxvii