Cisco Systems 8600 Series manual Command Line Interface Examples

Command Line Interface Examples

Command Line Interface Examples

The following pages have a number of command examples, including configuring BXM lines and trunks and adding connections terminating on BXM cards.

An example of the uptrk command for trunk 1 on a BXM in slot 4 of a BPX switch follows:

pubsbpx1		TN	SuperUser		BPX	15	9.1	Jan. 11	1998	18:52 GMT
TRK	Type	Current		Line Alarm Status				Other End
1.1	T3	Clear	-	OK				pubsaxi1(AXIS)
1.3	T3	Clear	-	OK				pubsipx1/8
4.1	OC3	Clear	-	OK				-

Last Command: uptrk 4.1

Next Command:

Note The initial command to up a trunk (uptrk) or to up a line (upln) on the BXM card configures all the ports of the card to be either trunks or lines (UNI port access). Following the uptrk command at each port, the addtrk command is used to activate a trunk for network access.

BXM T3/E3, 155, and 622 6-31