Cisco Systems 8600 Series manual Dspcds, Parameters-dspcds, Syntax dspcds l Example dspcds

dspcds

dspcds

Displays the cards in a shelf, front and back, with their type, revision, and status.

Syntax dspcds [l] Example dspcds

Attributes

Privilege	Jobs	Log	Node	Lock
1-6	No	No	IPX switch, IGX switch, BPX switch	No

Related Commands

dncd, dspcd, resetcd, upcd

Parameters-dspcds

Parameter	Description
l	Directs the system to display status of the cards on just the lower shelf of an IPX
	32 or IGX 8430. If not entered, dspcds displays the top shelf by default.

Description

For front and back card sets, the status field applies to the cards as a set. A letter “T” opposite a card indicates that it is running self-test. A letter “F” opposite a card indicates that it has failed a test. If lines or connections have been configured for a slot, but no suitable card is present, the display will list the missing cards at the top of the screen. If a special backplane is installed or if a card was previously installed, empty slots are identified as “reserved”.

For an IPX 32 or IGX 8430, the screen initially displays only the upper shelf with a “Continue?” prompt. Typing “y” to the prompt displays the cards in the lower shelf. The command dspcds followed by the letter “L” (for lower shelf) displays card status for just the lower shelf. For an IPX 8 or IGX 8410, the card information appears in only the left column. The status and update messages are as follows:

•	Active	Card in use, no failures detected.
•	Active—F	Card in use, failure(s) detected.
•	Active—T	Card active, background test in progress.
•	Active—F-T	Card active, minor failures detected, background test in progress.
•	Standby	Card idle, no failures.
•	Standby—F	Card idle, failure(s) detected.

Tag Switching 9-47