Cisco Systems 8600 Series manual Kdj

dspcds

•	Standby—T	Card idle, background test in progress.
•	Standby—F-T	Card idle, failure(s) detected, background test in progress.
•	Failed	Card failed.
•	Down	Card downed by user.
•	Down—F	Card downed, failure(s) detected.
•	Down—T	Card downed, failure(s) detected, background test in progress.
•	Mismatch	Mismatch between front card and back card.
•	Update *	Configuration RAM being updated from active control card.
•	Locked*	Incompatible version of old software is being maintained in case it is
		needed.
•	Dnlding*	Downloading new system software from the active BCC (BPX switch),
		or NPC (IPX switch or IGX switch), adjacent node, or from StrataView
		Plus.
•	Dnldr*	Looking to adjacent nodes or StrataView Plus for either software to load
		or other software needs you have not specifically requested.

In the preceding messages, an asterisk (*) means an additional status designation for BCC, NPC, or NPM cards. “F” flag in the card status indicates that a non-terminal failure was detected. Cards with an “F” status are activated only when necessary (for example, when no other card of that type is available). Cards with a “Failed” status are never activated.

Example

Sample Display:

n4			TN	SuperUser		BPX 15	9.1		Apr. 4	1998	16:40 PST
	FrontCard		BackCard				FrontCard		BackCard
	Type	Rev	Type	Rev	Status		Type	Rev	Type	Rev	Status
1	Empty					9	ASI-155	BE02	MMF-2	AB	Standby
2	BXM-155	BB16	MM-8	BA	Active	10	BME-622	KDJ	MM-2	FH	Active
3	Empty					11	BXM-E3	BB16	TE3-12P04		Active
4	BNI-E3	CE08	E3-3	JY	Active	12	BXM-155	BB16	MM-8	BA	Active
5	BNI-E3	CE08	E3-3	EY	Active	13	BXM-155	AC30	SM-4	P05	Active
6	BNI-T3	CF08	T3-3	FH	Active	14	Empty
7	BCC-3	DJL	LM-2	AA	Active	15	ASM	ACB	LMASM	P01	Active
8	BCC-3	DJL	LM-2	AA	Standby

Last Command: dspcds

Next Command:

9-48Cisco BPX 8600 Series Reference