Cisco Systems 8600 Series manual Cnfqbin, Example, Related Commands dspqbin Parameters-cnfqbin

cnfqbin

cnfqbin

Tag switched VC connections are grouped into large buffers called Qbins. This command configures the Qbins. For the EFT release of tag switching, Qbin 10 is used for tagged switch connections.

Syntax

cnfqbin <slot.port> <Qbin_#> <e/d> <BWmin> <discard_thr> <CLPlo> <CLPhi> <EFCI_thr>

Example

cnfqbin 13.4 10 E 0 65536 6095 80100 40

Attributes

Privilege	Jobs Log	Node	Lock
		BPX switch

Related Commands dspqbin

Parameters-cnfqbin

Parameter	Description
slot.port	slot.port
	Specifies the slot and port number for the BXM
Qbin number	Specifies the number of the Qbin to be configured
e/d	Enables or disables the Qbin.
Minimum bandwidth	Bandwidth allocated to the VCs
Qbin discard threshold
Low CLP threshold	Specifies a percentage of the Qbin depth such that, when the Qbin level falls below
	this level, the node stops discarding CLP=1 cells.
High CLP threshold	Specifies a percentage of the Qbin depth. When the threshold is exceeded, the node
	discards cells with CLP=1 in the connection until the Qbin level falls below the
	depth specified by CLP Lo.
EFCI threshold	Explicit Forward Congestion Indication.The percentage of Qbin depth that causes
	EFCI to be set.

9-34Cisco BPX 8600 Series Reference