Cisco Systems 8600 Series manual Dsprsrc 4.1, Dspqbin 4.1

Checking and Troubleshooting

Step 5 Enter the dsprsrc command as follows:

dsprsrc 4.1 1

The resulting screen should show the settings shown in the following example: Sample Display:

n4	TN	SuperUser		BPX 15	9.1	Apr. 4 1998	16:47 PST
Port/Trunk : 4.1
Maximum PVC	LCNS:		256	Maximum PVC Bandwidth:26000
Min Lcn(1) : 0 Min Lcn(2) : 0
Partition 1
Partition State :			Enabled
Minimum VSI	LCNS:		512
Maximum VSI	LCNS:		7048
Start VSI VPI:			2
End VSI VPI	:		15
Minimum VSI	Bandwidth :		26000	Maximum VSI Bandwidth :			100000

Last Command: dsprsrc 4.1 1

Next Command:

Step 6 Enter the dspqbin command as follows:

dspqbin 4.1 10

The resulting screen should show the settings shown in the following example: Sample Display:

n4	TN	SuperUser	BPX 15	9.1	Apr. 4 1998 16:48 PST
Qbin Database 4.1		on BXM qbin 10
Qbin State:			Enabled
Minimum Bandwidth:			0
Qbin Discard threshold:			65536
Low CLP threshold:			95%
High CLP threshold:			100%
EFCI threshold:			40%

Last Command: dspqbin 4.1 10

Next Command:

Step 7 If interfaces 4.2 and 4.3 are present, but not enabled, perform the previous debugging steps for interfaces 4.2 and 4.3 instead of 4.1, except for the dspnode command which does not show anything useful pertaining to ports 4.2 and 4.3.

Tag Switching 9-27