Cisco Systems 8600 Series manual Dspnode, BPX switch, IGX switch Yes

dspnode

dspnode

Displays a summary of interface devices connected to a routing node, or when executed from an IPX or IGX interface shelve shows the name of its hub node and trunk number.

Syntax:

dspnode

Related Commands

addshelf, delshelf, dsptrk

Attributes

Privilege	Jobs	Log	Node	Lock
1-6	No	No	BPX switch, IGX switch	Yes

Description

The command displays tag switch controller devices connected to a BPX node and interface shelves connected to an IGX switch or BPX node. The command can be used to isolate the shelf or tag switch controller where an alarm has originated.

The routing nodes in a network do not indicate the interface shelf or tag switch controller where an alarm condition exists, so dspnode may be executed at a hub node to find out which interface device originated the alarm.

When executed on an IPX or IGX interface shelve, dspnode shows the name of the hub node and the trunk number. Note that to execute a command on an IPX or IGX interface shelf, you must either use a control terminal directly attached to the IPX or IGX switch or telnet to the IPX/AF, as the vt command is not applicable.

Tag Switching 9-49