Cisco Systems 8600 Series manual Cnfrsrc, Related Commands Parameters-cnfrsrc

cnfrsrc

cnfrsrc

This command configures resources among AutoRoute PVCs and VSI partitions.

Syntax

cnfrsrc slot.port maxpvclcns maxpvcbw partition e/d minvsilcns maxvsilcns vsistartvpi vsiendvpi vsiminbw vsimaxbw

Example

cnfrsrc 4.1 256 26000 1 e 512 7048 2 15 26000 100000

Attributes

Privilege Jobs Log Node Lock

BPX switch

Related Commands

Parameters-cnfrsrc

Parameter (cnfrsrc)	Description
slot.port	Specifies the slot and port number for the BXM
maxpvclcns	The maximum number of LCNs allocated for AutoRoute PVCs for this port. For
	trunks there are additional LCNs allocated for AutoRoute that are not configurable.
	The dspcd <slot> command displays the maximum number of LCNs configurable
	via the cnfrsrc command for the given port. For trunks, "configurable LCNs"
	represent the LCNs remaining after the BCC has subtracted the "additional LCNs"
	needed.
	For a port card, a larger number is shown, as compared with a trunk card.
	Setting this field to zero would enable configuring all of the configurable LCNs to
	the VSI.
maxpvcbw	The maximum bandwidth of the port allocated for AutoRoute use.
partition	Partition number
e/d	enables or disables the VSI partition

9-36Cisco BPX 8600 Series Reference