Cisco Systems 8600 Series manual ASI-1, ATM Service Interface Card

ASI-1, ATM Service Interface Card

A BXM port may be configured to operate as either a trunk or UNI port. The BXM OC-12 back cards support Single Mode Fiber (SMF), Single Mode Fiber Long Reach (SMFLR), or Single Mode Fiber Extra Long Range (SMFXLR). The BXM OC-3 back cards support either Multi-Mode Fiber (MMF), Single Mode Fiber (SMF), or Single Mode Fiber Long Reach (SMFLR).

For a further description of the BXM cards refer to Chapter 6, BXM T3/E3, 155, and 622.

Figure 5-1 BPX Switch Service Interface Group

EXT/ INT NMS

clock port

Line

module-

BCC

Broadband

controller

card

primary

Line

module-

BCC

Broadband

controller

card

redundant

Alarm

outputs

Line

module-

ASM

Alarm/ status monitor

StrataBus backplane

Interface	Interface card	Interface card	Interface card
card	BXM-622	BXM-T3/E3	ASI-1
ASI-155	or	8 or 12 port
	BXM-622-2	or
		BXM-155	Line module
		4 or 8 port
Line module			LM-2E3
LM-2OC3-SMF,	Back card		or
LM-2OC3-SMFLR	1 or 2 port		LM-2T3
or	BXM-622-SMF	Back card
LM-2OC3-MMF	or	8 or 12 port
	BXM-622-SMFLR	BPX-T3/E3
		or
		4 or 8 port
		BXM-155-MMF,
		BXM-155-SMF,
		or
BPX service interface group		BXM-155-SMFLR		S6157

ASI-1, ATM Service Interface Card

The ATM Service Interface Card for T3 and E3 interfaces (ASI-1) is a front card for use in the BPX switch to interface an ATM user device e.g., Customer Premise Equipment (CPE). The ASI provides an industry-standard ATM User-to-Network Interface (UNI) or ATM Network-to-Network Interface (NNI) to the BPX switching fabric.

5-2Cisco BPX 8600 Series Reference