Cisco Systems 8600 Series manual Icr, Rif, Rdf

ATM Connection Configuration

Table 7-3 Connection Parameters with Default Settings and Ranges (Continued)

PARAMETER WITH	BXM T3/E3, OC3 &
[DEFAULT SETTING]	OC12 RANGE	ASI T3/E3 RANGE	ASI-155 RANGE
ICR:	MCR - PCR cells/sec	MCR - PCR cells/sec	N/A
max[MCR, PCR/10]
ADTF[1000]	62 - 8000 msec	1000 – 255000 msecs.	N/A
Trm[100]	ABRSTD: 1 - 100 msec	20 – 250 msecs.	N/A
	ABRFST: 3 - 255 msec
VC QDepth [16000/16000]	0 - 61440 cells	Applies to T3/E3 only	ATFR: 1 – 1366 cells
For ATFR/ATFST [1366/1366]		ABR: 1 – 64000 cells
		ATFR: 1 – 1366 cells
CLP Hi [80/80]	1 - 100%	1 – 100%	N/A
CLP Lo/EPD [35/35]	1 - 100%	1 – 100%	N/A
EFCI [30/30]	1 - 100%	1 – 100%	0 - 100%
For ATFR/ATFST [100/100]
RIF:			N/A
For ForeSight:	If ForeSight, then in	If ForeSight, then in
max[PCR/128, 10]	absolute (0 - PCR)	absolute (0 – PCR)
For ABR STD[128]	If ABR then 2n	If ABR, then 2n
	(1 - 32768)	(1 – 32768)
RDF:			N/A
For ForeSight [93]	If ForeSight, then %	If ForeSight, then %
	(0% - 100%)	(0% – 100%)
For ABR STD [16]	If ABR then 2n	If ABR, then 2n
	(1 - 32768)	(1 – 32768)
Nrm[32], BXM only	2 - 256 cells	N/A	N/A
FRTT[0], BXM only	0 - 16700 msec	N/A	N/A
TBE[1,048,320], BXM only	0 - 1,048,320 cells	N/A	N/A
	(different max range from
	TM spec. but limited by
	firmware for CRM(4095
	only) where
	CRM=TBE/Nrm
IBS[1/1]	0 - 24000 cells	T3/E3 ABR: 0 - 24000	0 - 999 cells
		cells
		ATFR: 1 - 107 cells
Trunk cell routing restrict (Y/N)	Y/N	Y/N	Y/N
[Y]

7-10Cisco BPX 8600 Series Reference