Organization

Organization

This publication is organized as follows:

Chapter 1

Introduction

 

Describes the overall operation of the BPX 8600 Series wide-area switches

 

and associated peripherals.

Chapter 2

General Description

 

Provides an overall physical and functional description of the BPX switch.

 

The physical description includes the BPX enclosure, power, and cooling

 

subsystems. The functional description includes an overview of BPX switch

 

operation.

Chapter 3

BPX Switch Common Core

 

Describes the common core group, comprising the Broadband Controller

 

Cards (BCCs), the Alarm/Status Monitor (ASM) card, associated backcards,

 

and the StrataBus backplane.

Chapter 4

Network Interface (Trunk) Cards

 

Describes the BPX switch network interface (trunk) cards, including the

 

Broadband Network Interface (BNI) and associated backcards. The BXM

 

card trunk operation is briefly described in this chapter with additional

 

information provided in Chapter 6.

Chapter 5

Service Interface (Line) Cards

 

This chapter contains a description of the BPX service interface (line) cards,

 

including the ATM Service Interface (ASI) and associated backcards. The

 

BXM card service (port UNI) operation is briefly described in this chapter

 

with additional information provided in Chapter 6.

Chapter 6

BXM T3/E3, 155, and 622

 

Describes the BXM card group which includes the BXM-T3/E3, BXM-155,

 

and BXM-622 card sets. Describes the operation of these cards in either

 

trunk or service (port UNI) mode.

Chapter 7

ATM Connections

 

Describes how ATM connection services are established by adding ATM

 

connections between ATM service interface ports in the network using ATM

 

standard UNI 3.1 and Traffic Management 4.0. It describes BXM and ASI

 

card operation and summarizes ATM connection parameter configuration.

Chapter 8

ATM and Frame Relay SVCs, and SPVCs

 

Provides a summary of switched virtual circuits and soft permanent virtual

 

circuits with respect to the BPX switch and co-located Extended Services

 

Processor. For additional information, refer to the Cisco WAN Service Node

 

Extended Processor Installation and Operation Release 2.2 document.

xxviCisco BPX 8600 Series Reference

Page 26
Image 26
Cisco Systems 8600 Series manual Organization