Cisco Systems 8600 Series manual Addshelf 4.1 vsi 1

Configuration Example

Sample Display:

Sample Display:
n4	TN	SuperUser	BPX 15	9.1	Apr. 4 1998 16:41 PST
Qbin Database 4.1 on BXM qbin 10
Qbin State:			Enabled
Minimum Bandwith:			0
Qbin Discard threshold:			65536
Low CLP/EPD threshold:			95%
High CLP/EPD threshold:			100%
EFCI threshold:			40%

Last Command: cnfqbin 4.1 10 e 0 65536 95 100 40

Next Command:

Step 9 Configure the Qbin 10 for ports 4.2 and 4.3 by performing the procedures in the previous step, but entering port 4.2 and 4.3 where applicable.

Step 10 5. Add a VSI controller to port 4.1, controlling partition 1

addshelf 4.1 vsi 1 1

Note The second “1” in the addshelf command is a controller ID. Controller IDs must be in the range 1-32, and must be set identically on the TSC and in the addshelf command. A controller id of 1 is the default used by the TSC.

Sample Display:

n4		TN	SuperUser		BPX 15	9.1	Apr. 4 1998 16:42 PST
			BPX Interface Shelf Information
Trunk	Name		Type	Alarm
3.1	j6c		AXIS	MIN
5.3	j5c		IPX/AF	MIN
4.1	VSI		VSI	OK

Last Command: addshelf 4.1 vsi 1 1

Next Command:

9-24Cisco BPX 8600 Series Reference