Cisco Systems 8600 Series Front Panel Description, BCC Front Panel Indicators, Indicator Function

Broadband Controller Card (BCC-32, BCC-3, BCC-4)

Figure 3-3 BCC-4 Block Diagram

I/O	I/O	I/O
module 1	module 2	module 12	TX data-1A

RX data-1A

DRSIU	DRSIU	DRSIU
			switch	BCC-A
	S
		TX data-2A	16 x 32 Xpoint
		RX data-2A		Arbiter	SIU
		TX data-12A
		RX data-12A
		s6392
		Polling bus-A
		Polling bus-B
		TX data-1B	Xpoint switch	Arbiter
		RX data-1B			SIU
		TX data-2B
		RX data-2B
			x 32
		TX data-12B		BCC-A
			16

RX data-12B

S6393

Front Panel Description

The BCC front panel has four Led, three card status LEDs, and a LAN LED. (See Figure 3-4and Table 3-1.)

Table 3-1		BCC Front Panel Indicators
No	Indicator		Function
1	LAN		Indicates there is data activity over the Ethernet LAN port.
2	card - act		Card active LED indicates this BCC is on-line and actively controlling
			the node.
3	card - stby		Card standby LED indicates this BCC is off-line but is ready to take over
			control of the node at a moments notice.
4	card - fail		Card fail LED indicates this BCC has failed the internal self-test routine
			and needs to be reset or replaced.

3-6Cisco BPX 8600 Series Reference