Cisco Systems 8600 Series manual Table C-4 Switch 1 Settings-Okidata 184 Printer Description

Printer

The High Speed Serial Interface DIP Switch consists of two DIP switches, SW1 and SW2, located on a serial-board that is attached to the printer's main board. Set switches 1 and 2 as indicated in Table C-4and Table C-5.

Table C-4	Switch 1 Settings—Okidata 184 Printer
Switch 1	Setting	Description
1	On	Odd parity.
2	On	No parity.
3	On	8 data bits.
4	On	Ready/busy protocol.
5	On	Test select circuit.
6	On	Print mode.
7	On	Busy line selection.
8	On	DTR pin 2 enabled.

Table C-5	Switch 2 Settings—Okidata 184 Printer
Switch 2	Setting	Description
1	Off	Transmission
2	On	Speed = 9600 baud.
3	On	Speed = 9600 baud.
4	On	DSR active.
5	On	Buffer = 32 bytes.
6	On	Timing = 200 ms.
7	On	Space after power on.
8	Don’t care	Not used.

BPX Switch Peripherals C-3