Cisco Systems 8600 Series manual YourID1 BPX Jan 1998 0241 GMT

Command Line Interface Examples

An example of the cnfcon command for a VBR connection 3.1.105.55 follows.

pubsbpx1	TN	YourID:1		BPX 15	9.1	Jan. 11 1998 02:41 GMT
Conn: 3.1.105.55			pubsbpx1	3.2.205.65		vbr
Description:
PCR(0+1)	% Util		CDVT(0+1)		AAL5 FBTC	SCR
50/50	100/100		250000/250000		n	50/50
MBS		Policing
1000/1000		3

This Command: cnfcon 3.1.105.55

PCR(0+1) [50/50]:

An example of the addcon command for an ABR connection follows. In this case, the choice to accept the default parameters was not accepted, and individual parameters were configured for a connection using ABR standard VSVD flow control.

pubsbpx1	TN	YourID	BPX 15	9.1	Jan. 11 1998 01:10 GMT
From		Remote	Remote			Route
3.1.104.54		NodeName	Channel	State	Type	Avoid COS O
3.1.104.54		pubsbpx1	3.2.204.64	Ok	abr
3.2.201.61		pubsbpx1	3.1.101.51	Ok	abr
3.2.201.62		pubsbpx1	3.1.101.52	Ok	abr
3.2.203.63		pubsbpx1	3.1.103.53	Ok	abr
3.2.204.64		pubsbpx1	3.1.104.54	Ok	abr
5.1.30.120		pubsbpx1	5.2.60.240	Ok	abr
5.1.31.121		pubsbpx1	5.2.61.241	Ok	abr
5.1.32.122		pubsbpx1	5.2.62.242	Ok	abr
5.1.33.123		pubsbpx1	5.2.63.242	Ok	abr
5.2.60.240		pubsbpx1	5.1.30.120	Ok	abr
5.2.61.241		pubsbpx1	5.1.31.121	Ok	abr
5.2.62.242		pubsbpx1	5.1.32.122	Ok	abr
5.2.63.242		pubsbpx1	5.1.33.123	Ok	abr

This Command: addcon 3.1.104.54 pubsbpx1 3.2.204.64 abr 100/100 95/95 50/50 * e d e d d 70/70 * 3 * 80/80 60/60 30/30 65/65 * 100 16 16 32 10 *

Add these connections (y/n)? y

BXM T3/E3, 155, and 622 6-37