Cisco Systems 8600 Series manual Network Interface Trunk Cards, BPX Switch Network Interface Group

Models: 8600 Series

1 424
Download 424 pages 24.57 Kb
Page 93
Image 93

C H A P T E R 4

Network Interface (Trunk) Cards

This chapter contains a description of the BPX switch network interface (trunk) cards, including the Broadband Network Interface (BNI) and associated backcards. The BXM cards are briefly described in this chapter and covered in full in a later chapter.

This chapter contains the following:

BPX Switch Network Interface Group

BXM Cards, Trunk Mode Summary

Broadband Network Interface Cards (BNI-T3 and BNI-E3)

T3 and E3 Line Modules (LM-3T3 and LM-3E3)

Broadband Network Interface Cards, BNI-155

OC3, Line Modules (SMF, SMFLR, & MMF)

Y-Cabling of BNI Backcard, SMF-2-BC9

BPX Switch Network Interface Group

The BPX switch network interface group of cards provides the interface between the BPX switch and the ATM network (see Figure 4-1). The BNI series of cards (DS3, E3, and OC3) are described in this chapter. The BXM card trunk operation is briefly described in this chapter with additional information provided in a later chapter. The BXM cards may be configured for either trunk or service (port UNI) mode. In trunk mode they provide BPX switch network interfaces.

BXM Cards, Trunk Mode Summary

The BXM card sets supports T3/E33, OC-3/STM-1 or OC-12/STM-4 interfaces, and provide the capacity to meet the needs of emerging bandwidth driven applications. The BXM cards provide high speed ATM connectivity, flexibility, and scalability. The card sets are comprised of a front card that provides the processing, management, and switching of ATM traffic and a back card that provides the physical interface for the card set.

A BXM port may be configured to operate as either a trunk or UNI port. The BXM OC-12 back cards support either Single Mode Fiber (SMF) or Single Mode Fiber Long Reach (SMFLR). The BXM OC-3 back cards support either Multi-Mode Fiber (MMF), Single Mode Fiber (SMF), or Single Mode Fiber Long Reach (SMFLR). The BXM-T3/E3 supports T3 1.544 Mbps and E3 34.368 Mbps interfaces.

For a further description of the BXM cards refer to Chapter 6, BXM T3/E3, 155, and 622.

Network Interface (Trunk) Cards 4-1

Page 93
Image 93
Cisco Systems 8600 Series Network Interface Trunk Cards, BPX Switch Network Interface Group, BXM Cards, Trunk Mode Summary