Cisco Systems 8600 Series manual General

General

Weight, approx:		73 lb. (33.2 kg.) empty BPX shelf, w/fans but no PS.
		6 lb. (2.7 kg.) each card.
		18 lb. (8.2 kg.) empty AC Power Supply Tray.
		16 lb. (7.3 kg.) each AC Power Supply.
		2 lb. (0.9 kg.) each DC Power Entry module.
Clearance Requirement:		At least 30 inches front and rear clearance; nominal 12 inch side
		clearance.
Power Source:		AC system: 180 – 264 VAC, 47 to 63 Hz.
		DC system: –42 to –56 VDC.
Power Requirements:		AC BPX-15: 13 A at 180 VAC (2300 VA).
		DC BPX-15: 40 A at –42 VDC (1680W).
Input Power Connector:		AC: 3-conductor IEC receptacle. 8 feet (2.4 m.) power cord
		supplied.
		DC: 3 Ring lug screw terminal connectors.
Circuit Breakers:		AC: 15 A on AC power supply assembly.
		DC: 40A on power entry module.
Fuses:		Individual Backplane Card slot fuses, F1 through F3 for Fans 1
		through 3, and F4 through F18 for card slots 1 through 15,
		5A-120VAC rating.
Operating Environment:		Operating Conditions are listed in Table A-1.
Shock:		Withstands 10G, 10 ms. at 1/2 sine wave.
Vibration:		Withstands 1/4 G, 20–500 Hz.
Heat Transfer to Room:		Up to 7200 BTUs depending on node configuration.
Table A-1	Ambient Temperature and Humidity Limits
			Limits
Conditions			Fahrenheit	Centigrade
Operating Temperature			+40 to +100 degrees	+4.5 to +38 degrees
Recommended			+68 to + 86 degrees	+20 to +30 degrees
Short-Term Temperature1			+35 to +120 degrees	+1.7 to + 49 degrees
Operating Relative Humidity			20% to 55%
			(non-condensing)
Short-Term Relative Humidity			10% to 80%
			non-condensing

1. Room temperature refers to conditions at a location 5 feet above the floor and 15 inches in front of the equipment.

A-2Cisco BPX 8600 Series Reference