Cisco Systems 8600 Series manual LMI and Ilmi Parameters, Traffic Shaping Rates

LMI and ILMI Parameters

Traffic Shaping Rates

Traffic shaping rates are listed in Table 7-8.

Table 7-8	Traffic Shaping Rates
Service Type	MCR	PCR
CBR	PCR	PCR
VBR	SCR * %Util	PCR
UBR	0	PCR
ABR	MCR * %Util	PCR

LMI and ILMI Parameters

The following is a listing of the LMI and ILMI parameters for the ASI and BXM:

For ILMI information, refer to Table 7-9.

Table 7-9	ILMI Parameters
Parameter	Description
VPI.VCI	VCCI for ILMI signaling channel equal 0.16
Polling Enabled	Keep-alive polling
Trap Enabled	VCC change of state traps
Polling Interval	Time between GetRequest polls
Error Threshold	Number of failed entries before ILMI link failure is
	declared.
Event Threshold	Number of successful polls before ILMI link failure
	is cancelled.
Addr Reg Enab	SVC Address Registration procedures enabled.

For the LMI information, refer to Table 7-10.

Table 7-10	LMI Parameters
Parameter	Description
VPI.VCI	VCCI for LMI signaling channel equal 0.31
Polling Enable	Keep-alive polling
T393	Status Enquiry timeout value
T394	Update Status timeout value
T396	Status Enquiry polling timer
N394	Status Enquiry retry count
N395	Update Status retry count

7-38Cisco BPX 8600 Series Reference