Error Messages
If either of the following error messages is displayed, the radio was either programmed incorrectly or needs servicing:
| DSP ERR | | DSP ERR | or | DIG V ERR |
| ERR=XXXX | | | | | |
| (Power Up only) | | | |
UNIVERSAL DEVICE CONNECTOR (UDC)
The Universal Device Connector (UDC) provides connections for external accessories such as a headset or a speaker-microphone. When the radio is locked in a vehicular charger the UDC provides the audio and control connections between the radio and the vehicular charger. The UDC is also used to program and service the radio.
ALERT TONES
The LPE-200 radio also provides audible alert tones or "beeps" to indicate the various operating conditions. These alert tones can be enabled or disabled through programming.
Call Originate
A short mid-pitched alert tone sounds after keying the radio (Push-To-Talk button is pressed). This indicates the radio has been assigned a working channel or that the radio is transmitting on a conventional channel and voice communication may begin immediately.
