receiver or observe the display for the absence
of 
. If the Channel Busy Lockout feature is programmed for the selected channel, the radio will not transmit when the channel is busy.
3.Press and hold the PTT button. The radio will
display 
and a short beep sounds (if programmed) indicating that communication can begin.
4.Hold the radio approximately three inches from the mouth and speak in a normal voice into the microphone (located at upper left front corner).
5.Release the PTT button when the transmission is complete and listen for a reply.
The following procedures outline scan operations for conventional channels.
ADDING CHANNELS TO A SCAN LIST
1.With scan operation turned off select the desired channel to add to the selected conventional system channel scan list.
2.Press A (Scan) or 6 (System). The
current status will be displayed in column 10 of line three for a
6 to add the channel to the scan list. 
is
displayed on the line. This sets the selected channel for
83
