Tyco LPE-200 manual Emergency Operation

activation message is sent by the system manager. Each radio that receives and acknowledges the regrouping instructions is successfully regrouped.

Pressing and holding the CLEAR/MONITOR button for 2.5 seconds toggles the user into and out of the dynamic regroup groupset. A double beep will sound for entry or exit. The display will indicate "REGRP_0x" where "x" is a digit of 1 to 8 indicating the group when dynamic regroup has been enabled by the user. If the radio is in dynamic regroup and the user selects a group that has not been regrouped, the display will show "NO ENTRY". The radio will be prevented from transmitting and receiving calls in this condition except for scanned groups.

NOTE

The mode of communication on a selected talkgroup is determined by programming. If the selected programmed talkgroup is programmed for digital communication, the regrouped talkgroup will be in digital mode; if programmed for analog communication, the regrouped talkgroup will be in analog mode.

EMERGENCY OPERATION

If the pre-programmed groupset on the currently selected system contains an EMER/HOME group and the radio is in dynamic regroup, the radio will

64