BUTTONS AND KNOBS
This section describes the primary function of the button and knob controls. Other functions associated with these controls are detailed in later sections.
SYSTEM/
GROUP/ CHANNEL KNOB
POWER ON-OFF/
VOLUME KNOB
Selects systems or groups/channels (depending on programming). This is a 16 - position rotary knob. See
SYSTEM/GROUP/CHANNEL SELECTION for details.
Note: The radio is supplied with a mechanical stop which can, if desired, limit the positions accessed. If the knob will not access all positions do not force it.
Applies power to the radio and adjusts the receiver's volume. Rotating the control clockwise applies power to the radio. A single alert tone (if enabled through programming) indicates the radio is operational.
Rotating the control clockwise increases the volume level. Minimum volume levels may be programmed into the radio to prevent missed calls due to a low volume setting. While adjusting the volume the display will momentarily indicate the volume
12
