Tyco LPE-200 manual System Model

Pressing PTT will initiate an individual call to the displayed logical ID. Turning the radio off and on will clear this list.

Sending An Individual Call (Trunked Mode Only)

Pre-Stored Individual Calls

The following procedures describes how to initiate and complete a pre-stored individual call.

System Model

1.To select a pre-stored individual phone number, enter the individual call mode using the #

key. turns on. Then scroll through the list of stored numbers using the <or >key.

2.Press the PTT button; when the radio is clear to

transmit, turns on, turns off and the channel access tone sounds. Line one shows the called individual's name if found in the list of stored individuals or LID followed by the logical ID number of the unit being called. The message *INDV* displays on line two.

52