Cisco Systems OL-5742-01 sgm updateuser, C-124, List of SGM Commands, Solaris Only Full Syntax

Appendix C SGM Command Reference

sgm updateuser

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

sgm updateuser

Solaris Only

Full Syntax

sgm updateuser [username]

Command Description

If SGM User-Based Access is enabled, changes the authentication level for the specified user. Valid levels are:

•1—Basic User

•2—Power User

•3—Network Operator

•4—Network Administrator

•5—System Administrator

If sgm authtype is set to local, this command also enables you to change the following settings:

•User’s password. When setting the password, follow the rules and considerations in the “Creating Secure Passwords” section on page 18-5.

See the “Enabling and Changing Users and Passwords (Solaris Only)” section on page 18-16for more information on authentication levels, and on the use of this command.

You must be logged in as the root user or as a super user to use this command.

Note If you have enabled Solaris authentication, you must be logged in as the root user, not a super user, to use this command. See the “Implementing SGM User-Based Access (Solaris Only)” section on page 18-2for more information.

	Cisco Signaling Gateway Manager User Guide
C-124	OL-5742-01