Cisco Systems OL-5742-01 sgm ipaccess, C-44, Solaris Only Full Syntax, Command Description

Appendix C SGM Command Reference

sgm ipaccess

sgm ipaccess

Solaris Only

Full Syntax

sgm ipaccess [add [ip-addr] clear edit list rem [ip-addr] sample]

Command Description

Enables you to create and manage a list of client IP addresses allowed to connect to the SGM server.

The list of allowed client IP addresses is contained in the ipaccess.conf file. By default, when you first install SGM, the ipaccess.conf file does not exist and SGM allows all client IP addresses to connect to the SGM server. To create the ipaccess.conf file and work with the list of allowed client IP addresses, specify one of the following keywords:

•add—Add the specified client IP address to the ipaccess.conf file. If the ipaccess.conf file does not already exist, this command creates a file with the first entry.

•clear—Remove all client IP addresses from the ipaccess.conf file, and allow connections from any SGM client IP address.

•edit—Open and edit the ipaccess.conf file directly. If the ipaccess.conf file does not already exist, this command creates an empty file.

•list—List all client IP addresses currently in the ipaccess.conf file. If no client IP addresses are listed (that is, the list is empty), connections from any SGM client IP address are allowed.

•rem—Remove the specified client IP address from the ipaccess.conf file.

•sample—Print out a sample ipaccess.conf file.

Any changes you make take effect when you restart the SGM server.

See the “Limiting SGM Client Access to the SGM Server (Solaris Only)” section on page 18-40for more information about using this command.

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

	Cisco Signaling Gateway Manager User Guide
C-44	OL-5742-01