Cisco Systems OL-5742-01 sgm secondaryserver, C-80, List of SGM Commands, Command Description

Appendix C SGM Command Reference

sgm secondaryserver

•Operating system configuration changes and program changes, at the Solaris level

•SGM restarts

•Failures of computers, programs, communications, and operations, at the Solaris level

To clear the log and restart the server, enter sgm seclog clear.

To display the contents of the log in reverse order, with the most recent security events at the beginning of the log, enter sgm seclog -r.

The default path and filename for the system security log file is /opt/CSCOsgm/logs/sgmSecurityLog.txt. If you installed SGM in a directory other than /opt, then the system security log file is located in that directory.

See the “Displaying the Contents of the System Security Log” section on page 18-22for more information on the use of this command.

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

sgm secondaryserver

Solaris Only

Full Syntax

sgm secondaryserver [hostname [naming-port] list]

Command Description

Configures a secondary SGM server, where:

•hostname is the name of the host on which the secondary SGM server is installed.

•naming-portis the SGM Naming Server port number for the secondary SGM server. The default port number is 44742.

For best results, Cisco recommends that you configure the primary server and the secondary server as secondaries for each other.

	Cisco Signaling Gateway Manager User Guide
C-80	OL-5742-01