Cisco Systems OL-5742-01 sgm enableuser, C-33, Solaris Only Full Syntax, Command Description

Appendix C SGM Command Reference

sgm enableuser

sgm enableuser

Solaris Only

Full Syntax

sgm enableuser [username]

Command Description

If SGM User-Based Access is enabled, re-enables the specified user’s authentication, which had been disabled either automatically by SGM or by a super user.

The user’s authentication is re-enabled with the same password as before.

See the “Enabling and Changing Users and Passwords (Solaris Only)” section on page 18-16for more information on the use of this command.

You must be logged in as the root user or as a super user to use this command.

Note If you have enabled Solaris authentication, you must be logged in as the root user, not a super user, to use this command. See the “Implementing SGM User-Based Access (Solaris Only)” section on page 18-2for more information.

List of SGM Commands

•SGM Command Reference, page C-1.

	Cisco Signaling Gateway Manager User Guide
OL-5742-01		C-33