Cisco Systems OL-5742-01 sgm badlogindisable, C-14, List of SGM Commands, Command Description

Appendix C SGM Command Reference

sgm badlogindisable

List of SGM Commands

•SGM Command Reference, page C-1.

sgm badlogindisable

Solaris Only

Full Syntax

sgm badlogindisable [number-of-attemptsclear]

Command Description

If SGM User-Based Access is enabled, number of unsuccessful login attempts by a user allowed before SGM disables the user’s authentication. SGM does not delete the user from the authentication list, SGM only disables the user’s authentication. To re-enable the user’s authentication, use the sgm enableuser command.

The valid range is 1 unsuccessful attempt to an unlimited number of unsuccessful attempts. The default value is 10 unsuccessful attempts.

To disable this function (that is, to prevent SGM from automatically disabling a user’s authentication after unsuccessful login attempts), enter sgm badlogindisable clear.

See the “Automatically Disabling Users and Passwords (Solaris Only)” section on page 18-10for more information on the use of this command.

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

	Cisco Signaling Gateway Manager User Guide
C-14	OL-5742-01