Cisco Systems OL-5742-01 sgm statreps dailyage, C-104, List of SGM Commands, Command Description

Appendix C SGM Command Reference

sgm statreps dailyage

If you enter this command without the number-of-daysargument, SGM displays the current maximum number of days. You can then change that value, or leave it as-is. The valid range is 1 day to an unlimited number of days. The default value is 10 days.

See the “Changing the Way SGM Handles Statistics Reports (Solaris Only)” section on page 15-3for more information on the use of this command.

This command has the same function as the sgm repcustage command.

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

sgm statreps dailyage

Solaris Only

Full Syntax

sgm statreps dailyage [number-of-days]

Command Description

Maximum number of days SGM is to archive daily network statistics reports.

If you enter this command without the number-of-daysargument, SGM displays the current maximum number of days. You can then change that value, or leave it as-is. The valid range is 1 day to an unlimited number of days. The default value is 90 days.

See the “Changing the Way SGM Handles Statistics Reports (Solaris Only)” section on page 15-3for more information on the use of this command.

This command has the same function as the sgm repdailyage command.

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

	Cisco Signaling Gateway Manager User Guide
C-104	OL-5742-01