Cisco Systems OL-5742-01 sgm msglog, C-58, List of SGM Commands, SGM Command Reference, page C-1

Appendix C SGM Command Reference

sgm msglog

If the message of the day is enabled, it is displayed whenever a user attempts to launch an SGM or GTT client:

•If the user accepts the message, the client launches.

•If the user declines the message, the client does not launch. Use the following keywords with this command:

•enable—Enables the message of the day function. Initially, the message of the day file is blank; use the sgm motd edit command to specify the message text.

•edit—Enables you to change the message of the day.

•cat—Displays the contents of the message of the day file.

•disable—Disables this function (that is, stops displaying the message of the day whenever a user attempts to launch an SGM or GTT client).

See the “Displaying a Message of the Day” section on page 18-18for more information on the use of this command.

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

sgm msglog

Solaris Only

Full Syntax

sgm msglog [clear -r]

Command Description

Uses PAGER to display the contents of the system message log.

To save the current contents of the log, clear the log, and restart the server, enter sgm msglog clear.

To display the contents of the log at the beginning of the log, enter

in reverse order, with the most recent messages sgm msglog -r.

	Cisco Signaling Gateway Manager User Guide
C-58	OL-5742-01