Cisco Systems OL-5742-01 sgm statreps acct, sgm statreps clean, C-102, Solaris Only Full Syntax

Appendix C SGM Command Reference

sgm statreps acct

sgm statreps acct

Solaris Only

Full Syntax

sgm statreps [acct noacct]

Command Description

Specifies whether SGM is to generate MTP3 accounting statistics reports:

•acct—Generate MTP3 accounting statistics reports. MTP3 accounting must be enabled on the links in order for SGM to generate MTP3 accounting statistics.

•noacct—Do not generate MTP3 accounting statistics reports. This is the default setting.

See the “Viewing the MTP3 Accounting Statistics Daily Detail Reports” section on page 15-109for more information on MTP3 accounting statistics reports.

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

sgm statreps clean

Solaris Only

Command Description

Removes all data from SGM network statistics reports, restoring the reports to a “clean” state.

See the “Changing the Way SGM Handles Statistics Reports (Solaris Only)” section on page 15-3for more information on the use of this command.

You must be logged in as the root user or as a super user to use this command.

	Cisco Signaling Gateway Manager User Guide
C-102	OL-5742-01