Cisco Systems OL-5742-01 appendix sgm userpass, sgm version, C-126, Solaris Only Full Syntax

Appendix C SGM Command Reference

sgm userpass

sgm userpass

Solaris Only

Full Syntax

sgm userpass [username]

Command Description

If SGM User-Based Access is enabled and sgm authtype is set to local, changes the specified user’s SGM security authentication password.

If the user’s authentication has been disabled, either automatically by SGM or by a super user, this command re-enables the user’s authentication with a new password.

If sgm authtype is set to solaris, you cannot use this command. Instead, you must manage passwords on the external authentication servers.

See the “Enabling and Changing Users and Passwords (Solaris Only)” section on page 18-16for more information on the use of this command.

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

sgm version

Solaris Only

Command Description

Displays version information for SGM servers and clients on the local host.

List of SGM Commands

•SGM Command Reference, page C-1.

	Cisco Signaling Gateway Manager User Guide
C-126	OL-5742-01