Cisco Systems OL-5742-01 appendix sgm inactiveuserdays, C-42, Solaris Only Full Syntax

Appendix C SGM Command Reference

sgm inactiveuserdays

sgm inactiveuserdays

Solaris Only

Full Syntax

sgm inactiveuserdays [number-of-daysclear]

Command Description

If SGM User-Based Access is enabled, number of days a user can be inactive before disabling that user account.

This function is disabled by default. If you do not specify this command, user accounts are never disabled as a result of inactivity.

If you enter the sgm inactiveuserdays command, the valid range is 1 day to an unlimited number of days. There is no default setting.

If you have enabled this function and you want to disable it (that is, prevent SGM from automatically disabling user accounts as a result of inactivity), enter sgm inactiveuserdays clear.

To re-enable the user’s authentication, use the sgm enableuser command.

See the “Automatically Disabling Users and Passwords (Solaris Only)” section on page 18-10for more information on the use of this command.

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

	Cisco Signaling Gateway Manager User Guide
C-42	OL-5742-01