Cisco Systems OL-5742-01 appendix sgm servername, C-81, List of SGM Commands, Full Syntax

Appendix C SGM Command Reference

sgm servername

If you use the sgm secondaryserver command to configure a secondary SGM server, but the primary SGM server fails before you launch the SGM client, then the SGM client has no knowledge of the secondary server.

To list the secondary SGM server that has been configured for this primary SGM server, enter the sgm secondaryserver list command.

You must be logged in as the root user or as a super user to use this command.

List of SGM Commands

•SGM Command Reference, page C-1.

sgm servername

Full Syntax

sgm servername [hostname]

Command Description

Resets the SGM server’ default host name, where hostname is the new default host name:

•Make sure the new default host name is valid and is defined in your /etc/hosts file. If it is not, you might not be able to start the SGM server.

•If you are not logged in as the root user or as a super user when you enter this command from an SGM client, the default host name is changed only for that SGM client, and for the user who entered the command.

•If you are logged in as the root user or as a super user when you enter this command, the default host name is changed for the SGM server and for the client, and the SGM server is restarted. The new default host name is used by the SGM server to register RMI services, and by SGM clients to connect to the server.

•If you are logged into a client-onlyinstallation as the root user or as a super user when you enter this command, the default host name is changed only for that SGM client. The new default host name is used by the SGM client to connect to the SGM server.

	Cisco Signaling Gateway Manager User Guide
OL-5742-01		C-81